What Happens when you Have a blockage?

What Happens when you Have a blockage

What is Happening Behind the scenes – When you Have a Blockage in your home?

A blockage can be explained not only with the use of words but also visualized with the use of creative imagery. With the use of an image, the similarity to the design of a sanatory system. In compassion to that of a structure of a tree with its separate branches dedicated to the transportation of nutrients. Sanitary pipework carries water down with the assistance of gravity. Whereas a tree draws a moisture from the earth upwards to sustain life to each branch. The trunk of a tree is where everything resonates from, so if there is a problem in this area, all the surrounding branches will be affected.

However, in each scenario, the waterways all lead back to the main branch. In a sanitary system, this is called the stack pipe. Sanitary pipework works best when installed at a gradient to assist the flow of water. This also removes the build up of stagnate water within the pipework.

The location of a blockage within the sanity system will dictate the level of difficulties that will be encountered when attempting to clean the restriction.

Why Does a Blockage affect – More than one fixture?

The severity of a restriction can also be calculated by observing how many plumbing fixtures are affected. For instance, if two fixtures are blocked, you can assume that the blockage is affecting a complete branch. But why does a blockage affect more than one fixture? This type of blockage is usually not in proximity to the affected area. It is not just a buildup of debris directly beneath a bath or a sink. It is usually the clogging up of branch pipe or the stack, the vertical channel. That transports all the waste water from each branch down and onwards to the sewage system below ground.

What Do you do if you – Have a Blockage?

Tackling the situation yourself is not only cost cutting but also useful, if the situation was to ever reoccur. Here are a few useful insights into what to look out for before a temping to remove a blockage. The objective is to remove whatever is restricting the natural flow of wastewater. This method is better than trying to force the blockage further down the pipework.

A blockage may require the removal of pipework in order to access the affected area. This should only be attempted by someone who is competent to do so. Other wise during the process of reconstructing the removed pipework a leak could occur.

Why not dissolve the blockage- Instead of removing it?

Not only will these harsh chemicals attempt to dissolve the debris clogging up the pipes. But also if there are any weak of perish push fit joints within the sanity system may be subject to leakage after treatment. The continual length of a joint free pipe is far more durable than one that pipe is fitted with a joint. For this reason, an installer will use solvent Weiding. Whenever a plastic pipe is used, in difficult to assess areas. A solvent weld is a fusion of a plastic joint by using a special paste. These joints are less likely to leak, resistant to moment and, if installed, current will easily withstand chemical treatment.

Can a Regular Plumber – Resolve most blockages?

Yes, if this line of work is his or her fortay, however, subject to the severity of the restriction. Most likely if the movement of wastewater has come to a complete standstill throughout a property. And the blockage is found to be in the stack pipe. The work may require the use of hydraulic equipment to force movement through the blocked pipe.

sanitary pipe.

This type of work is specialized and is not a service most plumbers provide. A drain specialist will access the problem with the use of sphacelated equipment such as. An Inspection Cameria to find the actual cause of the problem.

Leave a Reply

Your email address will not be published. Required fields are marked *